How To Draw A Survey Plan

The information in this article applies to:

QUESTION

How do I create a plot program using survey data?

ANSWER

Y'all can create a CAD polyline representation of your plot program using the altitude and begetting data from a survey, then edit the rectangular Terrain Perimeter line to fit it exactly. For the purposes of this example, nosotros volition use the following survey information:

• Line 1
  Length = 77.23 anxiety
  Angle = N3 xviii' 25" E
• Line ii
  Length = 65.81 anxiety
  Angle = N86 41' one" E
• Line three
  Length = 58.97 feet
  Angle = S7 5' 56" Eastward
• Line four
  Length = 57.7 feet
  Angle = S67 9' 50" W
• Arc i
  Arc Length = 25.xvi feet
  Radius = 27.thirteen feet

The image above shows what the completed plot program volition expect similar, based on this data. Nosotros have added the distance and bearing data with text for clarification.

To enter angles using bearings

1. To begin, start off past selecting File> New Plan  to open up a new, bare programme.
2. From the carte, select Terrain> Create Terrain Perimeter  to create a basic rectangular terrain.
3. Using theSelect Objects tool, click on one of the Terrain Perimeter's edges to select it, then click the Open up Object edit button.
4. At the bottom of the Terrain Specification dialog, click the Bending Way push.

   In Home Designer Pro, select the Number Style button instead.

5. In the Angle Style dialog, which opens next, select the Bearing radio button, then click OK twice to close both dialogs and apply your change.

   In Home Designer Pro, the Dialog Number/Angle Style dialog will brandish. Select the Quadrant Bearing pick, then click OK.

Angles in all dialogs will now be reported using bearings instead of degrees, equally volition bending information in the Status Bar.

To enter plot line information

1. Select CAD> Describe Line   and click to begin by drawing CAD Line one, starting from the bottom of the screen and dragging upwards.
   • You can depict Line 1 wherever yous like, just you may detect it easiest to describe the entire polyline if information technology is not located nigh the Terrain Perimeter.
   • If yous find that the Terrain Perimeter interferes with your cartoon process, click Select Objects push button, then select the Terrain Perimeter and Delete information technology.
2. Once the line has been created, utilize the Select Objects  tool to select the line, then click the Open Object edit push button.
3. In the Line Specification dialog:

   

   • Enter the Length information for Line 1.
   • Press the Tab central on your keyboard to update the dialog and move to the Angle  field.

     When you press the Tab fundamental, your Length information will automatically catechumen to inches.

   • Enter the Angle data for this line.

     Bearing information tin can be entered in this format: N3 18 25 E which is equal to N3°eighteen' 25" E.

   • Click OK to close the dialog and utilize your changes.
     
4. Repeat these steps to create Line 2, Line 3 and Line four, with each additional line starting at the stop indicate of the previously drawn line.

   Length, Bending, and other line properties tin be adjusted on the

   Selected Line panel of the Polyline Specification dialog when creating Lines 2, 3, and 4.

To create a curved plot line with a specific radius

1. Next, using the Describe Line  tool, click and elevate to describe a CAD line from the end of Line 4 to the beginning of Line one to connect the two.
2. Select this line and click on the Change Line/Arc edit push. By default, the arc will curve outward.
3. With the arc selected, click the Open Object edit push.
4. On the Selected Arc panel of the Polyline Specification dialog:
   • Specify the Radius and Arc Length listed at the elevation of this article for Arc 1.
   • Click OK to close the dialog and apply your change.
     
5. When you are finished drawing the plot plan polyline, return to the Dialog Number/Angle Style dialog and set the Angle to Degrees over again.

Proceed in heed when you lot become to create your own plot programme, that if you take received the plot plan data from a surveyor, the direction of any given line tin can be described in two ways using Quadrant Bearings, and not all surveyors will describe the lines of a given plot in the same direction, i.e., clockwise or counterclockwise. If the lines are non described in the same management, your result volition not be a closed polyline.

Your plot programme is now consummate, simply because information technology is a 2D CAD polyline, information technology tin simply be seen in plan view. To create a 3D object that can be seen in 3D camera views, you can edit the shape of the Terrain Perimeter to lucifer the plot program polyline.

To view the plot perimeter in 3D

1. If you deleted the Terrain Perimeter to brand information technology easier to draw your plot plan polyline, select Terrain> Create Terrain Perimeter  to create a new i.

   Note: In Home Designer Pro, a closed polyline, such every bit the 1 created to a higher place, can exist converted to a terrain perimeter. To do this, select the polyline, click on the Convert Polyline edit tool, and then select the Terrain Perimeter pick in the dialog that appears. If a terrain perimeter already exists or a polyline is not fully enclosed, this choice will be grayed out and inaccessible.

   
   
2. Using theSelect Objects tool, click on one of the Terrain Perimeter's edge lines to select information technology, so click and elevate the Move edit handle at its centre so that the Terrain Perimeter is positioned over your plot plan polyline.
3. Next, click on the edit handle in the meridian left corner, and drag it to the top left corner of your polyline at the terminate of Line 1.
4. Similarly, elevate the peak right edit handle to the end of Line ii, the bottom right edit handle to the end of Line 3, and the bottom left edit  handle to the beginning of Line i.
5. After you have washed this, select the bottom line of the Terrain Perimeter, select the Add Break  edit tool, and and then click on the bottom line most the plot plan arc to create a new corner handle at the point where you lot clicked.

   

6. Now y'all can click and drag this new diamond shaped edit handle to the terminate of line 4.

   

7. Select the new line segment that needs to get the arc and click click the Modify Line/Arc edit button, as y'all did before to create the arc in the plot program.
8. Finally, with the new curved segment selected, click Open up Object edit button and on the Selected Line/Arc panel of the Terrain Specification dialog:
   • Enter the aforementioned Radius and Arc Length values as you did for the plot plan polyline.
   • Click OK.

     The plot programme and terrain should now lucifer.

If you wish, you tin can employ the Text  tools in program view to add length and bearing information for each edge of the plot plan.

Dwelling Designer Professional has the adequacy to show the length and bearing of each polyline edge. Cheque both the Show Length and Show Angle check boxes on the Line Style panel of the Polyline Specification dialog. Edge Angles in Bearings can be specified in the CAD Defaults dialog.

Source: https://www.homedesignersoftware.com/support/article/KB-00850/drawing-a-plot-plan.html

Posted by: serranopentagess.blogspot.com

Share this post